DESCRIPTION

High quality hand-made concrete tiles made of cement, marble powder, and iron oxide and chromium pigments. The tiles are fiber reinforced, cold pressed one by one and steam dried for maximum strength and aesthetics. More than 20 formats and 100 colors to choose from, with the ability to customize other formats and colors.

APPLICATIONS

Interior walls Suitable for all residential and commercial spaces after pore sealing with sealant and shoe polish. The grounds Suitable for medium to high traffic in residential and commercial areas after pore sealing with sealant. The bathrooms Suitable for all bathrooms including wet areas such as showers, etc. The exterior Suitable for non-permanent outdoor installations exposed to water after sealing with exterior sealant. Some colors will disappear faster than others if they are exposed to UV rays (contact us for more information). * See Sheet: Installation, Treatment & Maintenance

MEASURES

FORMAT> 10 X 10 20 X 20 30 X 30 DIAMOND HEX MINI HEX RECTANGLE
SIZE mm 100 X 100 200 X 200 300 X 300 280 X 163 230 X 200 110 X 100 305 X 60
THICKNESS mm 12 12 16 14 12 14 15
WEIGHT kg/m 2 25 25 32 29 25 29 30
PIECES/BOX 72 18 8 30 18 72 42
m2 /BOX 0.72 0.72 0.72 0.67 0.62 0.62 0.77
77 77 60 72 90 77 60
BOX / CONTAINER 20’ 847 847 792 990 847 660 60
m2 / CONTAINER 600 600 470 530 610 520 500

TECHNICAL DESCRIPTION

Variations in color and size should be considered as distinguishing features of cement tiles. Due to the 12-month cement reaction time in the concrete tiles, an attenuation of the color shades will take place after installation. It is expected that colors will fade about 10% over time. In case of exposure direct to UV rays, some colors will fade.

TECHNICAL CHARACTERISTICS

TRIAL RESULTS
LENGTH AND WIDTH DS/EN 137481:2004 TM5.2 +/- 0.3% max. comply with the standard
THICKNESS DS/EN 137481:2004 TM5.2 +/- 2mm max. comply with the standard
EDGES DS/EN 137481:2004 TM5.2 +/- 0.3% max. comply with the standard
FLATNESS DS/EN 137481:2004 TM5.2 +/- 0.3% max. comply with the standard
WATER ABSORPTION DS/EN 137481:2004 TM5.2 signifie <8% comply with the standard
BREACK FORCE DS/EN 137481:2004 TM5.2 moyenne >5,00 MPa, Non individual value less 4,00MPa comply with the standard
SLIP RESISTA NCE DS/EN 137481:2004 No standards signifie 50 USRV (resistance au glisse
RESISTANCE NT Build 514 see results below see results below
RESISTANCE INTEMPERIES DS/EN 137482:2004 <1.0 kg/m2 signifie perte de masse comply with the standard

*Essai NT Build CaroM cement tiles :

Table 1

CHARACTER CHARACTER
0 Cosiderable, i.e. pronounced change
1 Cosiderable, i.e. pronounced change
2 Cosiderable, i.e. pronounced change
3 Cosiderable, i.e. pronounced change
4 Cosiderable, i.e. pronounced change
5 Severe, i.e. intense change

*White precipitate observed.

ADVANTAGE

Steam-treated and fiber-reinforced for great strength and unique aesthetic performance High quality control, good quality packaging, More than 30 formats More than 120 colors Pantone colors on order - minimum 20 m2 Custom sizes to order - minimum 50 m2 +10000 m2 in stock in Marrakech for immediate delivery - minimum order: 20 m2 Factory order in any combination of all formats and colors - minimum order 20 m2 - delivery 8 weeks - express orders to be delivered in 4 weeks with a surcharge